Inducer Components for Jackson & Church Furnaces
Inducer Motors
104278: Inducer motor for S/DF 15 - 100
$295.35
104278 Jackson & Church SDF and DF series induced draft fan motor
SINGLE PHASE RESILIENT BASE, HP: 1/4 RPM: 1625 VOLTAGE: 115/230/1/60AMP
Lead time: 5-7 Business days
051375: Inducer Fan Motor for SDF 125-200
$495.00
Part # 051375
Replacement Inducer Fan Motor for Jackson & Church SDF 125-200
3/4 HP ODP 1725 RPM
208-230/460V, 3ph, 60Hz
Lead Time: 5-7 Business Days
105790: SDF-225 to 300 Inducer Motor
$829.95
Part # 105790
1.5 HP 230/460V Inducer fan motor
1750 RPM
Open Drip Proof
For inducer wheel click here
Photo shown is stock photo. Actual motor will vary.
Typical manufacturing lead time: 5-7 working days
104053: SDF-225 to 400 Inducer Motor (TEFC)
$877.00
Part # 104053
1.5 HP 230/460V Inducer fan motor
1800 RPM
Totally enclosed fan cooled
For inducer wheel click here
Photo shown is stock photo. Actual motor will vary.
Typical manufacturing lead time: 5-7 working days
Inducer Wheels
105427 - ID-55 Inducer blower wheel (SDF 15 - 25)
$596.75
Jackson & Church ID-122 Inducer fan wheel
Used on SDF-15 thru SDF-25
5-1/2" x 1" x 2-1/2"
Static & dynamically balanced
In stock
Used on SDF-15 thru SDF-25
5-1/2" x 1" x 2-1/2"
Static & dynamically balanced
In stock
069886 - Inducer blower wheel (SDF 30-100)
$1,277.00
Jackson & Church ID-75 Inducer fan wheel
Used on SDF-30 through SDF-125
7-11/16 x 3-1/2 x 1 x 1/2"
Static & dynamically balanced
Lead Time: In Stock
Inducer Housings
105426: ID-55 Inducer housing for S/DF 15 - 25
$308.55
J&C part # 105426
Inducer housing for S/DF 15-25
Use with wheel # 105427
In stock
104552: ID-75 Inducer housing for S/DF 30 - 100
$778.38
J&C part # 104552
Inducer housing for S/DF 30 - 100
Use with wheel # 069886
Note: Mounting flange is a separate part and is to be stitch welded to housing during installation. Most customers re-use their existing flange but we do offer replacement flanges. We recommend welding your replacement housing on during installation to ensure alignment of any site specific ducting. If you would like to receive a housing with flange installed, please contact our parts department. Damper components are also separate from the inducer housing and are typically transferred from the original inducer assembly to the new housing.
Current lead time: 4-6 weeks ARO
303319: ID-105 Inducer housing for S/DF 125 - 200
$519.38
J&C part # 303319
Inducer housing for S/DF 125 - 200
Lead Time: Stock
Technical features:
- Steel Ø10-5/8" X 8-3/8" BSP Housing, Slip Seam, Standard Profile
- 10-7/8" ID
- CCW Rotation
- 12 GA Slip ring, Tack welded housing
- High temperature AL paint
Note: Mounting flange is a separate part and is to be stitch welded to housing during installation. Most customers re-use their existing flange but we do offer replacement flanges. We recommend welding your replacement housing on during installation to ensure alignment of any site specific ducting. If you would like to receive a housing with flange installed, please contact our parts department. Damper components are also separate from the inducer housing and are typically transferred from the original inducer assembly to the new housing.
